FAIRCHILD仙童，2000型气动容积增压器，美国进口
Model 2000 Pneumatic Volume BoosterPart Number: M2000
The Model 2000 Pneumatic Volume Booster converts a low flow signal to a high flow output. It is ideally suited for a variety of applications including the operation of air systems that require rapid valve or cylinder action. With its balanced supply valve and aspirator tube, the M2000 booster will maintain setpoint while delivering a strong boost of volume. In addition, its no bleed soft seat design minimizes air consumption of the system. As a pilot operated regulator design, the M2000 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure. The M2000 provides a flow capacity of 40 SCFM (68 m3/HR), which results in a Cv factor of just less than 1.0 in forward flow mode.Features
Flow capacity of 40 SCFM (68 m3/HR)
Balanced supply valve
Aspirator tube design
Soft supply and exhaust valve seats
Small signal volume
A separate control chamber isolates the diaphragm from the main flow
Unit construction
Benefits
Provides fast responsive operation
Minimizes the effect of supply pressure variation
Minimizes downstream pressure droop under flow conditions
Provides high forward and exhaust flows
Minimizes air consumption
Assures rapid response to pressure variation
Eliminates any hunting and buzzing
Allows you service the unit without removing it from the line
2000型气动容积增压器部件编号:M2000
2000型气动容积增压器将低流量信号转换为高流量输出。它非常适合各种应用，包括需要快速阀门或气缸动作的空气系统的操作。凭借其平衡的供应阀和吸气管，M2000助推器将在提供强大的容积提升的同时保持设定值。此外，它的无排气软阀座设计最大限度地减少了系统的空气消耗。作为一种先导式调节器设计，M2000可处理高达250 psig (17.0 BAR)， (1700 kPa)的供应压力。M2000的流量为40 SCFM (68 m3/HR)，在正向流动模式下，Cv系数小于1.0。特性
流量40 SCFM (68 m3/HR)
平衡供应阀
吸引管设计
软供应和排气阀座
信号体积小
一个单独的控制室将隔膜与主流隔离开来
单位工程
好处
提供快速响应操作
最大限度地减少供应压力变化的影响
在流动条件下最大限度地减少下游压力下降
提供高向前和排气流量
减少空气消耗
确保对压力变化的快速反应
消除任何狩猎和嗡嗡声
允许您在不将其从生产线上拆下来的情况下对设备进行维修
